I recently merged a bit of code that allows to export all the parts available in BOLTS for FreeCAD to IGES. IGES is a standardized file format for CAD data that is widely supported. Now BOLTS can be used by users of CAD applications besides FreeCAD and OpenSCAD.
In contrast to BOLTS for FreeCAD and OpenSCAD, where a certain size or variation of a part is created from a parametric model, the IGES distribution contains one file for each size and variation of a part. This results in a lot of files (about 1000), and forces us to choose which sizes should be included at export time.
This choice is codified in the blt files in form of common parameter combinations, I have blogged about this a while ago. I have not yet specified common parameters for all classes of parts, and BOLTS can not guess them in some cases. These parts are then ignored and not exported to IGES. A list of parts that miss common parameter information can be found on the tasks page. One only has to lookup a few vendor sites on the internet and find the most common sizes and variations of parameters for the part and enter them into the blt file.
STEP is a more recent and more powerful exchange format for CAD data. It is also widely supported by CAD applications. However, FreeCAD has a few issues with STEP, which cause problems when exporting the BOLTS parts. There is a bit of discussion around these issues and how to resolve them in the BOLTS github issue and in the FreeCAD forum.
I decided to postpone export to STEP, and go with IGES instead, as this works without problems.
As mentioned earlier, the IGES distribution consists of a lot of files, many of which are very similar. It currently has around 1600 files with a total size of around 120 MByte. These files are compressed into a single file which can then be downloaded from the download section.
In contrast to the FreeCAD and OpenSCAD distributions of BOLTS, which are available both as zip and tar.gz, the IGES distribution is only available as tar.xz, because this format achieves significantly better compression for this kind of content. The 120 MByte of IGES files result in a 12 MByte zip file, but only in a 2 MByte tar.xz file.
On Windows, tar.xz files can be decompressed using the 7z tool. On most Linux distributions the common tools to work with compressed data can handle tar.xz, or at least packages are available for xz-tools.