Zöllische Sechskantmutter
| Autor: | Johannes Reinhardt |
|---|---|
| Lizenz: | LGPL 2.1+ |
| Kollektion: | Nuts |
| Identisch mit: | ANSI B18.2.2, ASME B18.2.2 |
| ID: | ImperialHexagonNut |
| Quellen: | http://www.smithfast.com/finishedhexnuts.html |
Zeichnungen
Parameter
| Parametername | Beschreibung |
|---|---|
| d1 | Lochdurchmesser |
| s | Schlüsselweite |
| key | Gewindebezeichnung |
| m_max | Dicke |
Beschreibung
Sechskantmutter, zöllige Größen
FreeCAD
| Autor: | Johannes Reinhardt |
|---|---|
| Lizenz: | LGPL 2.1+ |
OpenSCAD
| Autor: | Johannes Reinhardt |
|---|---|
| Lizenz: | LGPL 2.1+ |
Aufruf
module ImperialHexagonNut(key="0.375 in", part_mode="default")
function ImperialHexagonNut_dims(key="0.375 in", part_mode="default")
function ImperialHexagonNut_conn(location,key="0.375 in", part_mode="default")Konnektoren
| Ort | Zeichnung |
|---|---|
| bottom |  |
| top |  |
Tabellen
| key | d1 (in) | s (in) | m_max (in) |
|---|---|---|---|
| 0.25 in | 0.25 | 0.4375 | 0.21875 |
| 0.3125 in | 0.3125 | 0.5 | 0.265625 |
| 0.375 in | 0.375 | 0.5625 | 0.328125 |
| 0.4375 in | 0.4375 | 0.6875 | 0.375 |
| 0.5 in | 0.5 | 0.75 | 0.4375 |
| 0.5625 in | 0.5625 | 0.875 | 0.484375 |
| 0.625 in | 0.625 | 0.9375 | 0.546875 |
| 0.75 in | 0.75 | 1.125 | 0.640625 |
| 0.875 in | 0.875 | 1.3125 | 0.75 |
| 1 in | 1.0 | 1.5 | 0.859375 |
| 1.125 in | 1.125 | 1.6875 | 0.96875 |
| 1.375 in | 1.375 | 2.0625 | 1.171875 |
| 1.5 in | 1.5 | 2.25 | 1.28125 |
| 1.625 in | 1.625 | 2.4375 | 1.390625 |
| 1.75 in | 1.75 | 2.625 | 1.5 |
| 2 in | 2.0 | 3.0 | 1.71875 |
| 2.25 in | 2.25 | 3.375 | 1.9375 |
| 2.5 in | 2.5 | 3.75 | 2.15625 |
| 2.75 in | 2.75 | 4.125 | 2.375 |
| 3 in | 3.0 | 4.5 | 2.59375 |