Metrische Unterlegscheibe mit Fase
| Autor: | Johannes Reinhardt |
|---|---|
| Lizenz: | LGPL 2.1+ |
| Kollektion: | Washers |
| Identisch mit: | ISO 7090, DIN ISO 7090, DIN EN ISO 7090, DIN 125 B |
| ID: | MetricPlainWasherWithChamfer |
| Quellen: | http://almetal.nl/en/techinfo/wsh/wd125.htm |
Zeichnungen
Parameter
| Parametername | Beschreibung |
|---|---|
| d1 | Innendurchmesser |
| d2 | Aussendurchmesser |
| key | Gewindebezeichnung |
| s | Dicke |
Beschreibung
Unterlegscheibe mit Fase, metrische Grössen
FreeCAD
| Autor: | Johannes Reinhardt |
|---|---|
| Lizenz: | LGPL 2.1+ |
OpenSCAD
| Autor: | Johannes Reinhardt |
|---|---|
| Lizenz: | LGPL 2.1+ |
Aufruf
module MetricPlainWasherWithChamfer(key="M3", part_mode="default")
function MetricPlainWasherWithChamfer_dims(key="M3", part_mode="default")
function MetricPlainWasherWithChamfer_conn(location,key="M3", part_mode="default")Konnektoren
| Ort | Zeichnung |
|---|---|
| top |  |
| bottom |  |
| outer |  |
Tabellen
| key | d1 (mm) | d2 (mm) | s (mm) |
|---|---|---|---|
| M1 | 1.1 | 3.0 | 0.3 |
| M1.2 | 1.3 | 3.5 | 0.3 |
| M1.4 | 1.5 | 4.0 | 0.3 |
| M1.6 | 1.7 | 4.0 | 0.3 |
| M1.7 | 1.8 | 4.5 | 0.3 |
| M2 | 2.2 | 5.0 | 0.3 |
| M2.2 | 2.4 | 6.0 | 0.5 |
| M2.3 | 2.5 | 6.0 | 0.5 |
| M2.5 | 2.7 | 6.0 | 0.5 |
| M2.6 | 2.8 | 7.0 | 0.5 |
| M3 | 3.2 | 7.0 | 0.5 |
| M3.5 | 3.7 | 8.0 | 0.5 |
| M4 | 4.3 | 9.0 | 0.8 |
| M5 | 5.3 | 10.0 | 1.0 |
| M6 | 6.4 | 12.0 | 1.6 |
| M7 | 7.4 | 14.0 | 1.6 |
| M8 | 8.4 | 16.0 | 1.6 |
| M10 | 10.0 | 20.0 | 2.0 |
| M12 | 13.0 | 24.0 | 2.5 |
| M14 | 15.0 | 28.0 | 2.5 |
| M16 | 17.0 | 30.0 | 3.0 |
| M18 | 19.0 | 34.0 | 3.0 |
| M20 | 21.0 | 37.0 | 3.0 |
| M22 | 23.0 | 39.0 | 3.0 |
| M24 | 25.0 | 44.0 | 4.0 |
| M27 | 28.0 | 50.0 | 4.0 |
| M30 | 31.0 | 56.0 | 4.0 |
| M33 | 34.0 | 60.0 | 5.0 |
| M36 | 37.0 | 66.0 | 5.0 |
| M39 | 40.0 | 72.0 | 6.0 |
| M42 | 43.0 | 78.0 | 7.0 |
| M45 | 46.0 | 85.0 | 7.0 |
| M48 | 50.0 | 92.0 | 8.0 |
| M52 | 54.0 | 98.0 | 8.0 |
| M56 | 58.0 | 105.0 | 9.0 |
| M60 | 62.0 | 110.0 | 9.0 |
| M64 | 64.0 | 115.0 | 9.0 |
| M68 | 70.0 | 120.0 | 10.0 |
| M72 | 74.0 | 125.0 | 10.0 |
| M76 | 78.0 | 135.0 | 10.0 |
| M80 | 82.0 | 140.0 | 12.0 |
| M85 | 87.0 | 145.0 | 12.0 |
| M90 | 93.0 | 160.0 | 12.0 |
| M100 | 104.0 | 175.0 | 14.0 |