DINEN 24014
| Autor: | Johannes Reinhardt |
|---|---|
| Lizenz: | LGPL 2.1+ |
| Kollektion: | Hexagon fasteners |
| Identisch mit: | ISO 4014, DINENISO 4014 |
| Status: | active |
| Standardisierungsbehörde: | DINEN |
| URL: | http://www.beuth.de/en/standard/din-en-iso-4014/140571988 |
| ID: | DINEN24014 |
| Quellen: | http://almetal.nl/en/techinfo/hex/hd931.htm, common parameters from http://shop.zweygart.de/p29262.html |
Zeichnungen
| Parametername | Beschreibung |
|---|---|
| d1 | threaded shaft diameter |
| k | Kopflänge |
| b2 | Gewindelänge des Schaft für 125 mm < l < 200 mm |
| b3 | Gewindelänge für l > 200 mm |
| s | Schlüsselweite |
| e | Kopfdurchmesser |
| l | Länge exklusive Kopf |
| key | Gewindebezeichnung |
| b1 | Gewindelänge des Schaft für l < 125 mm |
Beschreibung
Hexagon head bolt according to DINEN 24014
FreeCAD
| Autor: | Johannes Reinhardt |
|---|---|
| Lizenz: | LGPL 2.1+ |
OpenSCAD
| Autor: | Johannes Reinhardt |
|---|---|
| Lizenz: | LGPL 2.1+ |
Aufruf
module DINEN24014(key="M3", l=20, part_mode="default")
function DINEN24014_dims(key="M3", l=20, part_mode="default")
function DINEN24014_conn(location,key="M3", l=20, part_mode="default")Konnektoren
| Ort | Zeichnung |
|---|---|
| root |  |
| tip |  |
| head |  |
Tabellen
| key | d1 (mm) | k (mm) | s (mm) | b1 (mm) | b2 (mm) | b3 (mm) | e (mm) |
|---|---|---|---|---|---|---|---|
| M3 | 3.0 | 2.0 | 5.5 | 12.0 | None | None | 6.01 |
| M4 | 4.0 | 2.8 | 7.0 | 14.0 | None | None | 7.66 |
| M5 | 5.0 | 3.5 | 8.0 | 16.0 | None | None | 8.79 |
| M6 | 6.0 | 4.0 | 10.0 | 18.0 | 24.0 | None | 11.05 |
| M7 | 7.0 | 4.8 | 11.0 | 20.0 | 26.0 | None | 12.12 |
| M8 | 8.0 | 5.3 | 13.0 | 22.0 | 28.0 | None | 14.38 |
| M10 | 10.0 | 6.4 | 16.0 | 26.0 | 32.0 | 45.0 | 18.9 |
| M12 | 12.0 | 7.5 | 18.0 | 30.0 | 36.0 | 49.0 | 21.1 |
| M14 | 14.0 | 8.8 | 21.0 | 34.0 | 40.0 | 53.0 | 24.49 |
| M16 | 16.0 | 10.0 | 24.0 | 38.0 | 44.0 | 57.0 | 26.75 |
| M18 | 18.0 | 11.5 | 27.0 | 42.0 | 48.0 | 61.0 | 30.14 |
| M20 | 20.0 | 12.5 | 30.0 | 46.0 | 52.0 | 65.0 | 33.53 |
| M22 | 22.0 | 14.0 | 34.0 | 50.0 | 56.0 | 69.0 | 35.72 |
| M24 | 24.0 | 15.0 | 36.0 | 54.0 | 60.0 | 73.0 | 39.98 |
| M27 | 27.0 | 17.0 | 41.0 | 60.0 | 66.0 | 79.0 | 45.2 |
| M30 | 30.0 | 18.7 | 46.0 | 66.0 | 72.0 | 85.0 | 50.85 |
| M33 | 33.0 | 21.0 | 50.0 | 72.0 | 78.0 | 91.0 | 55.37 |
| M36 | 36.0 | 22.5 | 55.0 | 78.0 | 84.0 | 97.0 | 60.79 |
| M39 | 39.0 | 25.0 | 60.0 | 84.0 | 90.0 | 103.0 | 66.44 |
| M42 | 42.0 | 26.0 | 65.0 | 90.0 | 96.0 | 109.0 | 71.3 |
| M45 | 45.0 | 28.0 | 70.0 | 96.0 | 102.0 | 115.0 | 76.95 |
| M48 | 48.0 | 30.0 | 75.0 | 102.0 | 108.0 | 121.0 | 82.6 |
| M52 | 52.0 | 33.0 | 80.0 | None | 116.0 | 129.0 | 88.25 |
| M56 | 56.0 | 35.0 | 85.0 | None | 124.0 | 137.0 | 93.56 |
| M60 | 60.0 | 38.0 | 90.0 | None | 132.0 | 145.0 | 99.21 |
| M64 | 64.0 | 40.0 | 95.0 | None | 140.0 | 153.0 | 104.86 |