ASME B18.2.2
| Auteur: | Johannes Reinhardt |
|---|---|
| License: | LGPL 2.1+ |
| Collection: | Nuts |
| Identique à: | ANSI B18.2.2, Imperial hexagon nut |
| Status: | active |
| corps standard: | ASME |
| ID: | ASMEB1822 |
| Source: | http://www.smithfast.com/finishedhexnuts.html |
Plans
| Nom du paramètre | Description |
|---|---|
| d1 | diamètre du trou |
| s | Largeur entre plats |
| key | Désignation du filetage |
| m_max | épaisseur |
Description
Hexagon nut, imperial sizes
FreeCAD
| Auteur: | Johannes Reinhardt |
|---|---|
| License: | LGPL 2.1+ |
OpenSCAD
| Auteur: | Johannes Reinhardt |
|---|---|
| License: | LGPL 2.1+ |
Incantations
module ASMEB1822(key="0.375 in", part_mode="default")
function ASMEB1822_dims(key="0.375 in", part_mode="default")
function ASMEB1822_conn(location,key="0.375 in", part_mode="default")connecteurs
| Emplacement | Plan |
|---|---|
| bottom |  |
| top |  |
Tables
| key | d1 (in) | s (in) | m_max (in) |
|---|---|---|---|
| 0.25 in | 0.25 | 0.4375 | 0.21875 |
| 0.3125 in | 0.3125 | 0.5 | 0.265625 |
| 0.375 in | 0.375 | 0.5625 | 0.328125 |
| 0.4375 in | 0.4375 | 0.6875 | 0.375 |
| 0.5 in | 0.5 | 0.75 | 0.4375 |
| 0.5625 in | 0.5625 | 0.875 | 0.484375 |
| 0.625 in | 0.625 | 0.9375 | 0.546875 |
| 0.75 in | 0.75 | 1.125 | 0.640625 |
| 0.875 in | 0.875 | 1.3125 | 0.75 |
| 1 in | 1.0 | 1.5 | 0.859375 |
| 1.125 in | 1.125 | 1.6875 | 0.96875 |
| 1.375 in | 1.375 | 2.0625 | 1.171875 |
| 1.5 in | 1.5 | 2.25 | 1.28125 |
| 1.625 in | 1.625 | 2.4375 | 1.390625 |
| 1.75 in | 1.75 | 2.625 | 1.5 |
| 2 in | 2.0 | 3.0 | 1.71875 |
| 2.25 in | 2.25 | 3.375 | 1.9375 |
| 2.5 in | 2.5 | 3.75 | 2.15625 |
| 2.75 in | 2.75 | 4.125 | 2.375 |
| 3 in | 3.0 | 4.5 | 2.59375 |