DIN 7349
| Auteur: | Johannes Reinhardt |
|---|---|
| License: | LGPL 2.1+ |
| Collection: | Washers |
| Identique à: | Metric heavy duty plain washer |
| Status: | active |
| corps standard: | DIN |
| ID: | DIN7349 |
| Source: | http://almetal.nl/en/techinfo/wsh/wd7349.htm |
Plans
| Nom du paramètre | Description |
|---|---|
| d1 | diamètre intérieur |
| d2 | diamètre extérieur |
| key | Désignation du filetage |
| s | épaisseur |
Description
Heavy duty plain washer, metric sizes
FreeCAD
| Auteur: | Johannes Reinhardt |
|---|---|
| License: | LGPL 2.1+ |
OpenSCAD
| Auteur: | Johannes Reinhardt |
|---|---|
| License: | LGPL 2.1+ |
Incantations
module DIN7349(key="M10", part_mode="default")
function DIN7349_dims(key="M10", part_mode="default")
function DIN7349_conn(location,key="M10", part_mode="default")connecteurs
| Emplacement | Plan |
|---|---|
| top |  |
| bottom |  |
| outer |  |
Tables
| key | d1 (mm) | d2 (mm) | s (mm) |
|---|---|---|---|
| M3 | 3.2 | 9.0 | 1.0 |
| M4 | 4.3 | 12.0 | 1.6 |
| M5 | 5.3 | 15.0 | 2.0 |
| M6 | 6.4 | 17.0 | 3.0 |
| M8 | 8.4 | 21.0 | 4.0 |
| M10 | 10.5 | 25.0 | 4.0 |
| M12 | 13.0 | 30.0 | 6.0 |
| M14 | 15.0 | 36.0 | 6.0 |
| M16 | 17.0 | 40.0 | 6.0 |
| M18 | 19.0 | 44.0 | 8.0 |
| M20 | 21.0 | 44.0 | 8.0 |
| M22 | 23.0 | 50.0 | 8.0 |
| M24 | 25.0 | 50.0 | 10.0 |
| M27 | 28.0 | 60.0 | 10.0 |
| M30 | 31.0 | 68.0 | 10.0 |