DIN 915
| Auteur: | Johannes Reinhardt |
|---|
| License: | LGPL 2.1+ |
|---|
| Collection: | Hexagon socket fasteners |
|---|
| Identique à: | ISO 4028 |
|---|
| Status: | active |
|---|
| corps standard: | DIN |
|---|
| ID: | DIN915 |
|---|
| Source: | http://www.fullermetric.com/products/socket/din915socket_set_screw_dog_point.aspx |
|---|
Paramètres
| Nom du paramètre | Description |
|---|
| d1 | maximum point diameter |
| point | point type |
| s | Largeur entre plats |
| e | width across edges |
| d | diamètre |
| l | longueur total |
| t | socket depth |
| key | Désignation du filetage |
Description
Hexagon socket set screw with dog point
FreeCAD
OpenSCAD
Incantations
connecteurs
Tables
| key | d (mm) | d1 (mm) | t (mm) | e (mm) | s (mm) |
|---|
| M3 | 3.0 | 2.0 | 1.2 | 1.73 | 1.5 |
| M4 | 4.0 | 2.5 | 1.5 | 2.3 | 2.0 |
| M5 | 5.0 | 3.5 | 2.0 | 2.87 | 2.5 |
| M6 | 6.0 | 4.0 | 2.0 | 3.44 | 3.0 |
| M8 | 8.0 | 5.5 | 3.0 | 4.58 | 4.0 |
| M10 | 10.0 | 7.0 | 4.0 | 5.72 | 5.0 |
| M12 | 12.0 | 8.5 | 4.8 | 6.86 | 6.0 |
| M16 | 16.0 | 12.0 | 6.4 | 9.15 | 8.0 |
| M20 | 20.0 | 15.0 | 8.0 | 11.43 | 10.0 |
| M24 | 24.0 | 18.0 | 10.0 | 13.72 | 12.0 |
Comments