I am looking for ways to make it easier to use parts from BOLTS) in OpenSCAD. At the moment it is a bit awkward because one has to know precisely how the BOLTS part is positioned and oriented and then has to translate and rotate it around. This often requires the knowledge of some dimensions of the part, so one has to query BOLTS about it, and suddenly it is a lot of code that is difficult to read and annoying to write.
OpenSCAD code in general quickly becomes big and difficult, because it usually describes several solids with dimensions and positions that depend on each other, so everything is quite entangled on a global scale. The module concept allows for a certain degree of reuse, but I still often find myself in the situation that I get stuck with understanding a piece of massively nested OpenSCAD code that I wrote only a while ago. Things like translate([h-2*l,40-k,a+b+f-c]) rotate([0,90,0]) translate(...).
I believe that scope is a fundamental ingredient to clarity and brevity in programming. Allowing the programmer to think only about the current problem he is attacking, while moving everything else out of sight, results in clean and readable code.
I had bookmarked obijuans attach library(or on Thingiverse) already quite a while ago, because I had hoped, that the connector concept could allow for cleaner, less entangled code. When playing around with it, I realized that a connector is basically a local coordinate system with a origin, one axis to fix the direction and another axis to fix the rotation around the first axis.
I like the idea of local coordinate systems, because it is a local scope that can be convenient to think in. It also seems a promising approach to avoid or at least reduce the cumbersome and difficult nested transformations or complicated arguments that I often end up with.
I hacked together a bit of code to do that, heavily inspired by the attach library, but working around some issues. At the moment it allows to do three things:
The first and the last operation are slightly improved variations of the functionality of the attach library.
To make use of this method of positioning in BOLTS, each part provides a few connectors located at strategic positions of the part. Then the align operation can be used to position and orient the part. This way things like "put that bolt the so that its tip is here" or "the head of that bolt should be at this point" can be expressed in a compact and readable way.
include <BOLTS.scad> $fn=50; % cube([10,40,50]); //connectors cube_cs = new_cs(origin = [10,20,20], axes = [[-1,0,0],[0,-1,0]]); washer_cs = ISO7089_conn("top","M4"); bolt_cs = ISO4017_conn("root","M4",20); nut_cs = ISO4035_conn("bottom","M4"); //connectors can be displayed with //show_cs(cube_cs); //thickness of washer s = get_dim(ISO7089_dims("M4"),"s"); //position washer and bolt at the location specified by cube_cs align(washer_cs,cube_cs) ISO7089("M4"); align(bolt_cs,cube_cs,[-s,0,0]) ISO4017("M4",20); align(washer_cs,cube_cs,[10+s,0,0]) ISO7089("M4"); align(nut_cs,cube_cs,[10+s,0,0]) ISO4035("M4");
which is readable, compact and flexible. To change the position or orientation of the bolted connection, one just has to change cube_cs. Changing the size of the bolts and washers change M4 is also easy.
You can try this functionality with the most recent development snapshot from the BOLTS page. Either place the contents of the archive in the same directory as the .scad files that use BOLTS, or follow the instructions on how to install BOLTS for OpenSCAD.
Not all parts have connectors yet, but nuts, washers, hex bolts and batteries do. The names of the connectors are listed in the OpenSCAD section of the part page.
There is no documentation for this feature (apart from this blog post), because I might still change the way things work.