DIN 1025-4
| Autor: | Bernd Hahnebach |
|---|
| Lizenz: | LGPL 2.1+ |
|---|
| Kollektion: | Profiles I |
|---|
| Identisch mit: | HEM Profil |
|---|
| Status: | active |
|---|
| Standardisierungsbehörde: | DIN |
|---|
| ID: | DIN1025_4 |
|---|
| Quellen: | http://www.bauforumstahl.de/Querschnittswerte |
|---|
Zeichnungen
| Parametername | Beschreibung |
|---|
| h | Trägerhöhe |
| b | Flanschbreite |
| r | Verrundungsradius |
| tw | Stegbreite |
| tf | Flanschdicke |
| l | Trägerlänge |
| type | Trägertyp |
Beschreibung
HEM profile, metric european standard i-beam profile
FreeCAD
OpenSCAD
Aufruf
Konnektoren
Tabellen
| type | h (mm) | b (mm) | tw (mm) | tf (mm) | r (mm) |
|---|
| HEM100 | 120.0 | 106.0 | 12.0 | 20.0 | 12.0 |
| HEM120 | 140.0 | 126.0 | 12.5 | 21.0 | 12.0 |
| HEM140 | 160.0 | 146.0 | 13.0 | 22.0 | 12.0 |
| HEM160 | 180.0 | 166.0 | 14.0 | 23.0 | 15.0 |
| HEM180 | 200.0 | 186.0 | 14.5 | 24.0 | 15.0 |
| HEM200 | 220.0 | 206.0 | 15.0 | 25.0 | 18.0 |
| HEM220 | 240.0 | 226.0 | 15.5 | 26.0 | 18.0 |
| HEM240 | 270.0 | 248.0 | 18.0 | 32.0 | 21.0 |
| HEM260 | 290.0 | 268.0 | 18.0 | 32.5 | 24.0 |
| HEM280 | 310.0 | 288.0 | 18.5 | 33.0 | 24.0 |
| HEM300 | 340.0 | 310.0 | 21.0 | 39.0 | 27.0 |
| HEM320 | 359.0 | 309.0 | 21.0 | 40.0 | 27.0 |
| HEM340 | 377.0 | 309.0 | 21.0 | 40.0 | 27.0 |
| HEM360 | 395.0 | 308.0 | 21.0 | 40.0 | 27.0 |
| HEM400 | 432.0 | 307.0 | 21.0 | 40.0 | 27.0 |
| HEM450 | 478.0 | 307.0 | 21.0 | 40.0 | 27.0 |
| HEM500 | 524.0 | 306.0 | 21.0 | 40.0 | 27.0 |
| HEM550 | 572.0 | 306.0 | 21.0 | 40.0 | 27.0 |
| HEM600 | 620.0 | 305.0 | 21.0 | 40.0 | 27.0 |
| HEM650 | 668.0 | 305.0 | 21.0 | 40.0 | 27.0 |
| HEM700 | 716.0 | 304.0 | 21.0 | 40.0 | 27.0 |
| HEM800 | 814.0 | 303.0 | 21.0 | 40.0 | 30.0 |
| HEM900 | 910.0 | 302.0 | 21.0 | 40.0 | 30.0 |
| HEM1000 | 1008.0 | 302.0 | 21.0 | 40.0 | 30.0 |
Comments