| Auteur: | Johannes Reinhardt |
|---|---|
| License: | LGPL 2.1+ |
| Collection: | Hexagon socket fasteners |
| Identique à: | ANSI B18.3.6M |
| ID: | HexSocketSetScrew |
| Source: | http://www.fullermetric.com/products/socket/index.aspx, data is more or less the intersection of the data from DIN 913-916 |
Pas de plan trouvé
| Nom du paramètre | Description |
|---|---|
| d1 | maximum point diameter |
| point | point type |
| s | Largeur entre plats |
| e | width across edges |
| d | diamètre |
| l | longueur total |
| t | socket depth |
| key | Désignation du filetage |
Hexagon socket set screws
This part is not available for FreeCAD
This part is not available for OpenSCAD
| key | d (mm) | t (mm) | e (mm) | s (mm) |
|---|---|---|---|---|
| M3 | 3.0 | 1.2 | 1.73 | 1.5 |
| M4 | 4.0 | 1.5 | 2.3 | 2.0 |
| M5 | 5.0 | 2.0 | 2.87 | 2.5 |
| M6 | 6.0 | 2.0 | 3.44 | 3.0 |
| M8 | 8.0 | 3.0 | 4.58 | 4.0 |
| M10 | 10.0 | 4.0 | 5.72 | 5.0 |
| M12 | 12.0 | 4.8 | 6.86 | 6.0 |
| M16 | 16.0 | 6.4 | 9.15 | 8.0 |
| M20 | 20.0 | 8.0 | 11.43 | 10.0 |
| d1 (mm) | flat | cone | dog | cup |
|---|---|---|---|---|
| M3 | 2.0 | None | 2.0 | 1.4 |
| M4 | 2.5 | None | 2.5 | 1.5 |
| M5 | 3.5 | None | 3.5 | 2.0 |
| M6 | 4.0 | 1.5 | 4.0 | 3.0 |
| M8 | 5.5 | 2.0 | 5.5 | 5.0 |
| M10 | 7.0 | 2.5 | 7.0 | 6.0 |
| M12 | 8.5 | 3.0 | 8.5 | 8.0 |
| M16 | 12.0 | None | 12.0 | 10.0 |
| M20 | 15.0 | None | 15.0 | 14.0 |