ANSI B18.3.6M
| Auteur: | Johannes Reinhardt |
|---|
| License: | LGPL 2.1+ |
|---|
| Collection: | Hexagon socket fasteners |
|---|
| Identique à: | Hex socket set screw |
|---|
| Status: | active |
|---|
| corps standard: | ANSI |
|---|
| ID: | ANSIB1836M |
|---|
| Source: | http://www.fullermetric.com/products/socket/index.aspx, data is more or less the intersection of the data from DIN 913-916 |
|---|
Paramètres
| Nom du paramètre | Description |
|---|
| d1 | maximum point diameter |
| point | point type |
| s | Largeur entre plats |
| e | width across edges |
| d | diamètre |
| l | longueur total |
| t | socket depth |
| key | Désignation du filetage |
Description
Hexagon socket set screws
FreeCAD
OpenSCAD
Incantations
connecteurs
Tables
| key | d (mm) | t (mm) | e (mm) | s (mm) |
|---|
| M3 | 3.0 | 1.2 | 1.73 | 1.5 |
| M4 | 4.0 | 1.5 | 2.3 | 2.0 |
| M5 | 5.0 | 2.0 | 2.87 | 2.5 |
| M6 | 6.0 | 2.0 | 3.44 | 3.0 |
| M8 | 8.0 | 3.0 | 4.58 | 4.0 |
| M10 | 10.0 | 4.0 | 5.72 | 5.0 |
| M12 | 12.0 | 4.8 | 6.86 | 6.0 |
| M16 | 16.0 | 6.4 | 9.15 | 8.0 |
| M20 | 20.0 | 8.0 | 11.43 | 10.0 |
| d1 (mm) | flat | cone | dog | cup |
|---|
| M3 | 2.0 | None | 2.0 | 1.4 |
|---|
| M4 | 2.5 | None | 2.5 | 1.5 |
|---|
| M5 | 3.5 | None | 3.5 | 2.0 |
|---|
| M6 | 4.0 | 1.5 | 4.0 | 3.0 |
|---|
| M8 | 5.5 | 2.0 | 5.5 | 5.0 |
|---|
| M10 | 7.0 | 2.5 | 7.0 | 6.0 |
|---|
| M12 | 8.5 | 3.0 | 8.5 | 8.0 |
|---|
| M16 | 12.0 | None | 12.0 | 10.0 |
|---|
| M20 | 15.0 | None | 15.0 | 14.0 |
|---|
Comments