flanges
| Autor: | KOLANICH |
|---|
| Lizenz: | Unlicense |
|---|
| Kollektion: | Vacuum |
|---|
| Identisch mit: | CF |
|---|
| ID: | Flanges |
|---|
| Quellen: | http://www.tracepartsonline.net/(S(c314dufymcnxxurthiwo4pow))/PartDetails.aspx?PartFamilyID=30-03062015-098588&PartID=30-03062015-098588 |
|---|
Zeichnungen
Keine Zeichnung vorhanden
Parameter
| Parametername | Beschreibung |
|---|
| openingDiameter | The diameter of the opening in the part visible from the side of the flange |
| flangeDiameter | The diameter of the flange |
| outerDiameter | the outer diameter of the part |
| flangeSize | The thickness of the flange |
| holeDiameter | The diameters of the central hole, use zero is the hole is unneeded |
| innerDiameter | The inner diameter of the part |
| dn | DN type |
| partLen | The length of the part |
| holeTrDiameter | The diameter of the circumference the holes for fasteners are placed on |
| openingDepth | The depthd of the opening in the part visible from the side of the flange |
| grooveRadius | The radius of the flange |
Beschreibung
flanges
FreeCAD
This part is not available for FreeCAD
OpenSCAD
Aufruf
module Flanges(dn="DN100", part_mode="default")
function Flanges_dims(dn="DN100", part_mode="default")
function Flanges_conn(location,dn="DN100", part_mode="default")
Konnektoren
Tabellen
| dn | partLen (mm) | innerDiameter (mm) | outerDiameter (mm) | flangeDiameter (mm) | flangeSize (mm) | grooveRadius (mm) | openingDepth (mm) | openingDiameter (mm) | holeDiameter (mm) | holeTrDiameter (mm) |
|---|
| DN100 | 1000.0 | 100.0 | 104.0 | 152.0 | 20.0 | 1.5 | 9.0 | 106.0 | 0.0 | 130.3 |
Comments