Parts list

CF

Autor:KOLANICH
Lizenz:Unlicense
Kollektion:Vacuum
Identisch mit:flanges
Status:active
Standardisierungsbehörde:EN
ID:CF
Quellen:http://www.tracepartsonline.net/(S(c314dufymcnxxurthiwo4pow))/PartDetails.aspx?PartFamilyID=30-03062015-098588&PartID=30-03062015-098588

Parameter

Parametername Beschreibung
openingDiameter The diameter of the opening in the part visible from the side of the flange
flangeDiameter The diameter of the flange
outerDiameter the outer diameter of the part
flangeSize The thickness of the flange
holeDiameter The diameters of the central hole, use zero is the hole is unneeded
innerDiameter The inner diameter of the part
dn DN type
partLen The length of the part
holeTrDiameter The diameter of the circumference the holes for fasteners are placed on
openingDepth The depthd of the opening in the part visible from the side of the flange
grooveRadius The radius of the flange

Beschreibung

EN CF flanges

FreeCAD

OpenSCAD

Autor:KOLANICH
Lizenz:Unlicense

Aufruf

module CF(dn="DN100", part_mode="default")
function CF_dims(dn="DN100", part_mode="default")
function CF_conn(location,dn="DN100", part_mode="default")

Konnektoren

Ort Zeichnung

Tabellen

dn partLen (mm) innerDiameter (mm) outerDiameter (mm) flangeDiameter (mm) flangeSize (mm) grooveRadius (mm) openingDepth (mm) openingDiameter (mm) holeDiameter (mm) holeTrDiameter (mm)
DN100 1000.0 100.0 104.0 152.0 20.0 1.5 9.0 106.0 0.0 130.3

Comments